Aug
21
Tue
2018
Make & Take Rain Barrel Workshop @ Dakota County Fairgrounds
Aug 21 @ 6:00 pm – 7:30 pm
Make your own rain barrel

It’s easy, make and take a rain barrel.

What’s one of the simplest, high-impact ways to save water and help protect our watershed? Using a rain barrel.

The workshop will begin with a presentation on how home lawn and garden practices impact our waters and how we can make a difference. Next, we’’ll discuss the watershed-friendly benefits of rain barrels in more detail, then review how to build, incorporate, install and maintain them.

With guidance from Friends of the Mississippi River staff, participants will then build their very own rain barrel to take home following the workshop. Participants will receive the necessary parts ($35 per kit) and  be guided through the process of converting used syrup barrels from Great Lakes Coca-Cola of Eagan, into a rain barrel to take home and install.

Jun
2
Thu
2022
Seeding + Garlic Mustard Pull at Linear Park @ Vermillion River Linear Park
Jun 2 @ 6:00 pm – 8:00 pm

Seeding + garlic mustard pull at Vermillion River Linear Park

Join the Vermillion Stewards in distributing native seed and removing garlic mustard at Vermillion River Linear Park in Hastings. Friends of the Mississippi River staff will provide instructions. Please contact Sophie Downey to register. FMR requests limiting groups to 4 or fewer.

Sep
14
Wed
2022
Hastings DWSMA Open House @ Dakota County Extension and Conservation Center
Sep 14 @ 3:00 pm – 8:00 pm

Open House – Hastings Drinking Water Supply Management Area Groundwater Protection Rule Process

Do you farm or own cropland in the Hastings Drinking Water Supply Management Area (DWSMA)?

The City of Hastings has high nitrate in their city wells. The Minnesota Department of Agriculture (MDA) is working with a team of local farmers, crop advisers, and others to develop a list of region-specific farming practices to reduce nitrate in groundwater and the city wells.

Join us to learn and share ideas about the proposed practices and the Groundwater Protection Rule process. Practice adoption is voluntary but could become regulatory if the voluntary approach is unsuccessful.

MDA staff will be available to discuss these topics, collect comments and ideas from farmers, and answer questions. A 30-minute presentation will be shared at 4 p.m. and 7 p.m. Light refreshments will be served.

Oct
27
Thu
2022
Nitrate Clinic for Private Well Owners @ Pleasant Hill Library, Hastings
Oct 27 @ 4:30 pm – 6:30 pm

Nitrate Clinic for Private Well Owners

Bring private well water samples in a clean container to get your water tested for nitrates. Visit the interactive We are Water MN exhibit while you wait for your results.

Pleasant Hill Library
1490 S. Frontage Roa​d, Hastings
Thursday, Oct. 27, 4:30–6:30 p.m. ​

Jul
20
Thu
2023
Public Meeting: Alimagnet Lake alum treatment @ Burnsville City Hall, Dakota Room in lower level
Jul 20 @ 6:00 pm – 7:00 pm

Public Meeting: Alimagnet Lake Feasibility Study

This spring and summer, the Vermillion River Watershed Joint Powers Organization (VRWJPO) is leading an Alimagnet Lake alum (aluminum sulfate) treatment feasibility study. City of Burnsville and City of Apple Valley natural resources staff are also participating in the process. VRWJPO has hired a consultant, Barr Engineering, to conduct field work, analyze data and help put together the final feasibility report. This report is expected to be completed in July. We are hosting a public meeting on July 20, 2023 where the findings of the report will be presented.

What is an alum treatment?

An alum treatment is a common water quality improvement practice in shallow lakes that have excessive phosphorus and poor water clarity as a result of algae growth. Often times phosphorus is released into the water column from lake bottom sediments during the summer months. When alum is added to the water, it attaches to phosphorus and falls to the bottom of the lake, preventing it from feeding algae and improving water clarity. Increased clarity following alum treatments can also lead to increased aquatic plant growth, which help to keep phosphorus levels in check.

One of the first steps in planning for a potential alum treatment is to conduct a feasibility study, which will determine whether Alimagnet Lake is a good candidate for the treatment, and if it is, how to most effectively apply alum in the lake, and the estimated costs. The study will also look at alternative solutions to improve water quality, other than an alum treatment.

At the public meeting, there will be a short presentation to present the findings of the study and then time for attendees to ask questions or provide feedback on the findings. If alum treatment is determined to be a feasible option for Alimagnet Lake, VRWJPO would anticipate applying for a grant in late summer of 2023 to obtain funding to complete the work. No treatment would occur prior to 2024.

If you have any questions regarding the public meeting, please feel free to contact Caleb at 952-895-4543 or caleb.ashling@burnsvillemn.gov.

Aug
7
Wed
2024
Irrigation Water Testing – Vermillion @ Vermillion City Hall
Aug 7 @ 12:00 pm – 4:00 pm

Irrigation Water Testing – Vermillion (city)

Dakota County, the Dakota County Soil and Water Conservation District, and the Minnesota Agricultural Water Resource Center will be offering farmers who irrigate their crops the opportunity to test their irrigation water for nitrogen. Testing is at no cost.

Participants will receive their results the same day. They will learn how to credit nitrate in their irrigation water for next year’s nutrient management plans. Participants will also walk through the Irrigation Management Assistant (IMA) Tool with a SWCD staff member. The tool helps with irrigation scheduling.

Private well owners can also have their drinking water tested for nitrate. They will receive their results and treatment recommendations, if applicable.

Sampling instructions for irrigators

Samples may be taken the day of analysis or ahead of time. Samples taken ahead of time must be frozen until attending a session to prevent samples from degrading.

Participants may bring in several frozen samples collected over a period of several days to get a more representative result.

Samples can be collected directly from irrigators or by installing a boiler drain to a pivot point or the well itself.

If sampling directly from irrigators:

  • Allow irrigators to pump water for at least 15 minutes before sampling.
  • Fill a clean 5-gallon bucket, or similar container. Mix before collecting the sample.
  • Collect the test sample in a small Ziploc bag or a clean bottle or container. Only about 1 ounce of water is needed for testing.

Sampling instructions f​or private well owners

  • Collect samples from your primary drinking water source after eight hours of nonuse, preferably first thing in the morning
  • Collect your sample in a small Ziplock bag or clean bottle or container
  • Do not run the water before sampling — collect the first draw in the container
  • Only about 1 ​ounce of water is needed for testing, but collecting extra is advised.​

Test results

Nitrogen results are confidential. Participants are not required to take any action after testing. They will receive their results and information on nitrogen crediting.​

Aug
15
Thu
2024
Irrigation Water Testing – Farmington @ Dakota County Extension and Conservation Center
Aug 15 @ 12:00 pm – 4:00 pm

Irrigation Water Testing – Farmington

Dakota County, the Dakota County Soil and Water Conservation District and the Minnesota Agricultural Water Resource Center will be offering farmers who irrigate their crops the opportunity to test their irrigation water for nitrogen. Testing is at no cost.

Participants will receive their results the same day. They will learn how to credit nitrate in their irrigation water for next year’s nutrient management plans. Participants will also walk through the Irrigation Management Assistant (IMA) Tool with a SWCD staff member. The tool helps with irrigation scheduling.

Private well owners can also have their drinking water tested for nitrate. They will receive their results and treatment recommendations, if applicable.

Sampling instructions for irrigators

Samples may be taken the day of analysis or ahead of time. Samples taken ahead of time must be frozen until attending a session to prevent samples from degrading.

Participants may bring in several frozen samples collected over a period of several days to get a more representative result.

Samples can be collected directly from irrigators or by installing a boiler drain to a pivot point or the well itself.

If sampling directly from irrigators:

  • Allow irrigators to pump water for at least 15 minutes before sampling.
  • Fill a clean 5-gallon bucket, or similar container. Mix before collecting the sample.
  • Collect the test sample in a small Ziploc bag or a clean bottle or container. Only about 1 ounce of water is needed for testing.

Sampling instructions f​or private well owners

  • Collect samples from your primary drinking water source after eight hours of nonuse, preferably first thing in the morning
  • Collect your sample in a small Ziplock bag or clean bottle or container
  • Do not run the water before sampling — collect the first draw in the container
  • Only about 1 ​ounce of water is needed for testing, but collecting extra is advised.​

Test results

Nitrogen results are confidential. Participants are not required to take any action after testing. They will receive their results and information on nitrogen crediting.​

Aug
20
Tue
2024
Irrigation Water Testing – Marshan Twp @ Marshan Town Hall
Aug 20 @ 12:00 pm – 4:00 pm

Irrigation Water Testing – Marshan Township

Dakota County, the Dakota County Soil and Water Conservation District and the Minnesota Agricultural Water Resource Center will be offering farmers who irrigate their crops the opportunity to test their irrigation water for nitrogen. Testing is at no cost.

Participants will receive their results the same day. They will learn how to credit nitrate in their irrigation water for next year’s nutrient management plans. Participants will also walk through the Irrigation Management Assistant (IMA) Tool with a SWCD staff member. The tool helps with irrigation scheduling.

Private well owners can also have their drinking water tested for nitrate. They will receive their results and treatment recommendations, if applicable.

Sampling instructions for irrigators

Samples may be taken the day of analysis or ahead of time. Samples taken ahead of time must be frozen until attending a session to prevent samples from degrading.

Participants may bring in several frozen samples collected over a period of several days to get a more representative result.

Samples can be collected directly from irrigators or by installing a boiler drain to a pivot point or the well itself.

If sampling directly from irrigators:

  • Allow irrigators to pump water for at least 15 minutes before sampling.
  • Fill a clean 5-gallon bucket, or similar container. Mix before collecting the sample.
  • Collect the test sample in a small Ziploc bag or a clean bottle or container. Only about 1 ounce of water is needed for testing.

Sampling instructions f​or private well owners

  • Collect samples from your primary drinking water source after eight hours of nonuse, preferably first thing in the morning
  • Collect your sample in a small Ziplock bag or clean bottle or container
  • Do not run the water before sampling — collect the first draw in the container
  • Only about 1 ​ounce of water is needed for testing, but collecting extra is advised.​

Test results

Nitrogen results are confidential. Participants are not required to take any action after testing. They will receive their results and information on nitrogen crediting.​